Ceramic Honeycomb Gas Heater Honeycomb Ceramic
Product Description
Honeycomb ceramic heater can be achieved at more than J/kgk1000. Use a temperature≥ 1700° C in the heating furnace, roaster, soaking furnace, pyrolysis furnace, fuel can be savings of more than 40%, increase in production for more than 15%. The flue gas temperature below 150° C. So It has got a wide application in many industrial productions.
Ceramic honeycomb body has a low thermal expansion coefficient, specific heat large area, thermal shock stabili ty, small thermal resistance, corrosion resistance and other characteristics, be applied in many industrial situatiions.
Honeycomb Ceramic Heater Features:
*It has advatange of high surface area, high heat capacity, low thermal expension, corrosion resistant and temperature resistance, widely use in chemical, metallurgical, gas and environmental protection industries.
Applications:
*Tower packing-high surface area, uniform distribution fluid, high efficiency of mass transfer
*Catalyst carrier-reduce the oxidation temperature of VOA in purification of industrial exhaus gas
*Thermal regenerative packing-good heat capacity, saving energy 40-70%in RTO system
*Gas combustion distributing pl ate-distribute uniformly and make the combustion complete, saving energy more than 10% refractory kiln furniture-low bulk density, good thermal efficiency
Ceramic honeycomb body has a low thermal expansion coefficient, specific heat large area, thermal shock stabili ty, small thermal resistance, corrosion resistance and other characteristics, be applied in many industrial situatiions.
Honeycomb Ceramic Heater Features:
*It has advatange of high surface area, high heat capacity, low thermal expension, corrosion resistant and temperature resistance, widely use in chemical, metallurgical, gas and environmental protection industries.
Applications:
*Tower packing-high surface area, uniform distribution fluid, high efficiency of mass transfer
*Catalyst carrier-reduce the oxidation temperature of VOA in purification of industrial exhaus gas
*Thermal regenerative packing-good heat capacity, saving energy 40-70%in RTO system
*Gas combustion distributing pl ate-distribute uniformly and make the combustion complete, saving energy more than 10% refractory kiln furniture-low bulk density, good thermal efficiency
| Composition | Value (%) |
| SiO 2 | 16-20 |
| Al 2 O 3 | 72-77 |
| MgO | <1 |
| Fe 2 O 3 | <1.5 |
| TiO 2 | <4 |
| K 2 O+Na 2 O+CaO | 2-3 |
| No | Index | Unit | Value |
| 1 | Gross Density | g/cm 3 | 2.3-2.6 |
| 2 | Average Linear Expansion(20-1000 ° C) | 10 -6 /k -1 | 6-7.6 |
| 3 | Specific Heat Capacity | KJ/Kg | 900-1200 |
| 4 | Heat Conductivity | W/MK | 1.8-3 |
| 5 | Soft Temp. | ° C | 1400 |
| 6 | Maximum Application Temp. | ° C | 1350 |
| 7 | Corrosion Resistance Against Acid | % | 99.5 |
| Dimension | Quantity of channels | Wall thickness (mm) | Channel Width (mm) | Surface area (m 2 /m 3 ) | Void section (%) | Packaging density (kg/ m 3 ) | Weight per piece (kg) |
| 150 × 150 × 300 | 25 × 25 | 1.0 | 4.96 | 580 | 68 | 696 | 4.7 |
| 150 × 150 × 300 | 32 × 32 | 1.0 | 3.66 | 695 | 61 | 755 | 5.1 |
| 150 × 150 × 300 | 40 × 40 | 0.7 | 3.03 | 891 | 65 | 814 | 5.5 |
| 150 × 150 × 300 | 43 × 43 | 0.7 | 2.77 | 940 | 63 | 858 | 5.8 |
| 150 × 150 × 300 | 50 × 50 | 0.6 | 2.39 | 1090 | 63 | 903 | 6.1 |
| 150 × 150 × 300 | 60 × 60 | 0.5 | 1.99 | 1303 | 63 | 932 | 6.3 |